nRF24L01p(nRF24L01+) with PA and LNA
is compatible with nRF24L01+(nRF24L01p),and there are same interface. These module add a power amplifier(PA) circuit and Low Noise Amplifier(LNA) circuit, which could transmit longer distances and more stable performance for industry standard. Increased PA and LNA, RF switch, band pass filter,formed a professional full two-way RF power amplifier, making effective transmission distance could reach 1100 meter with 2DB Antenna at 250kbps data rate on open area.
– Worldwide 2.4GHz ISM band operationFree license to use.
– 126 RF channels.
– High air data rate: 250kbps, 1 and 2Mbps.
– Transmitter: 11.3mA at 0dBm output power.
– Receiver: Fast AGC for improved dynamic range.
– Receiver: Integrated channel filters.
– Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe
– MultiCeiver for 1:6 star networks.
– Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
– Low Power Management:1.9 to 3.6V supply range.
– Peak current draw : ~130mA
– GFSK modulation.
– Auto packet transaction handling.
– Easy for designed.
– Small size:16.5mm*45.5mm.
– VCC is range of 1.9V~3.6V, do not exceed this range, otherwise it will destroy the module.
– Except of VCC and GND the other pins can be direct connected to 5V
– Doesnt need level converter between MCU I/O and module, since the modul can handle up to 5v logic level
